Tayana Owners Group Forum Index Tayana Owners Group
We have moved discussion to Google Groups -- TOGnews Forum was closed 11/1/07
 
    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups
 Log in to check your private messagesLog in to check your private messages   Log inLog in 

Yanmar 3QM30F valve clearance

 
This forum is locked: you cannot post, reply to, or edit topics.   This topic is locked: you cannot edit posts or make replies.    Tayana Owners Group Forum Index -> Tayana Talk - We Have Moved to Google Groups -- CLOSED 11/1/07
View previous topic :: View next topic  
Author Message
wlawler



Joined: 31 Jul 2006
Posts: 16
Location: Edgewater, MD

PostPosted: Fri Oct 05, 2007 7:05 am    Post subject: Yanmar 3QM30F valve clearance Reply with quote

I want to check the valve clearance on a 3QM30F engine. I have the spec for clearance from the shop manual, but am not sure of the timing sequence. My interpretation of the timing info given in the shop manual and what I see when manually rotating the shaft do not match up. I am looking for the folllowing info:
1) physical location of cylinders 1, 2 , and 3
2) firing order of same
3) best sequence of rotation to check the clearances and angular displacement to get there.
Almost certainly the 'error' is in my interpretation of the manual. I would be most interested in a response from someone who has performed this task.

Thanks in advance
_________________
Bill Lawler
Katsun, 1981 TYA37 PH
Back to top
View user's profile Send private message
Display posts from previous:   
This forum is locked: you cannot post, reply to, or edit topics.   This topic is locked: you cannot edit posts or make replies.    Tayana Owners Group Forum Index -> Tayana Talk - We Have Moved to Google Groups -- CLOSED 11/1/07 All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
Questions? Need Help? Send email to: webmaster@tognews.com


Powered by phpBB © 2001, 2005 phpBB Group